Developing a Smok Pen
The Smok Pen is really a revolutionary vaporizing pen that allows for a write-to-write experience, whilst you are abroad. This is because of the unique design of the pen. It has two tanks, one smaller compared to the other, that house the e juice and charged batteries. When the user wants to write, he just places the pen in to the smaller tank and places the ink in the chamber where it will be vaporized. He simply turns on the pen and writes as though he is writing under a black mirror.
One of the greatest attributes of the Smok Pen is its ability to charge while it is on your own desk. The reason being the coils on the Smok Pen were created in a way to help keep the e juice from dripping onto the table or somewhere else. This is due to the 0.3-ohm coil that is placed in the Smok Pen. The 0.3-ohm coil means that even the slightest of air currents will not affect the writing process. Simply because the electronic circuitry has protection built-in so that it will not be suffering from extremely podsmall.com low voltage electric currents.
The Smok Pen could be charged internally with a charger or via the USB connection that is included with it. Because the electronic circuitry includes a safety barrier built in, therefore there is no risk involved when charging the device through the computer. The Smok Pen has a charging capacity of sixteen 50 mah batteries, that is great for all pens that use one or two batteries.
To keep the Smok Pen doing work for an extended period of time it is important that you don’t overcharge the battery. Overcharging the battery will reduce the voltage that is available and may eventually result in these devices malfunctioning. Overcharging the Smok Pen could also affect the vaporizing process. In the event that you feel that your battery isn’t getting the vapor it should, remove the pen from the energy source and let it cool down for a few minutes.
The fire button on the Smok Pen is situated in the bottom right corner of the device. The fire button has an orange light, which indicates that it is on. It is possible to press this button to activate the electronic heating element which will permit you to vaporize the oil. After you have done so you can remove the coil from the holder and stick it into the holder and place the Smok Pen in to the airflow chamber, that will cause the heating element to start out heating up and burning off the wick.
Once the coil is removed from the holder the airflow chamber is ready for the sub-ohm cartridge. The coils are placed inside the holder and they get heated from the airflow. After they get hot they begin to turn blue, which is the indication that it is ready for the pen’s battery. Make sure that you place your sub-ohm in to the chamber before you push the fire button. If you don’t put the coil in to the airflow chamber then the oil will leak and cause the leaking of e-juice.
Before you put the battery into the pen, you must make sure that you have disconnected each of the leads. Then you have to remove the Smok Pen’s cap and locate the leak or drip tip. You need to clean this with a little cotton bud, so that you could eliminate leak. Then reattach the cap back again to the Smok Pen and you will be ready to place the battery in to the pen.
The final portion of the construction process is the adapter plate, which fits into the Smok Vaporizer’s USB port. This plate lets you charge your e-juice through your computer, as long as you have an adapter for USB connection. I really like this part as it allows me to charge my entire kit simultaneously without fretting about running out of power or constantly running out of e-juice.